Инструменты
Материал из Chipwiki
Перейти к: навигация, поиск
Intense Tech with Defence Mech — различия между версиями
(→‎LSDj Wave Synth Deep Dive Part 2)
Строка 145: Строка 145:
 
==LSDj Wave Synth Deep Dive Part 2==
 
==LSDj Wave Synth Deep Dive Part 2==
 
''Оригинальная статья на [https://chiptuneswin.com/blog/intense-tech-with-defense-mech-lsdj-wave-synth-deep-dive-part-2/ chiptuneswin.com]''<br/>
 
''Оригинальная статья на [https://chiptuneswin.com/blog/intense-tech-with-defense-mech-lsdj-wave-synth-deep-dive-part-2/ chiptuneswin.com]''<br/>
 +
 +
<spoiler text="В процессе перевода">
 +
In this tutorial we’ll continue covering what one needs to understand the Wave channel synth! Last time we covered Signal, Volume, Filter, Cutoff, and Q. This time we’re specifically getting into the wave synth parameters of Dist, Phase, Vshift, and Limit. We’re going to show you how to add some real noisy crunch to your wave sounds! By the end you should have a great idea of how to get any kind of sound out of the wave channel, from a silky smooth lead to a gnarly crunchy bass.
 +
 +
In part 1, I talked about how different filter settings affect what harmonics are produced in the wave channel. As we have seen, the more cycles we have of a waveform in the wave frame, the higher the harmonic that will be produced. In fact, the number of cycles corresponds to the number of the harmonic that will play.
 +
 +
If you’ve taken a look at the settings on your own or read the LSDj manual, you might have found another way to change the number of cycles: by changing the Phase.
 +
 +
The Phase parameter in LSDj compresses the shape of the waveform horizontally. When the Phase type is Normal, increasing the Phase value above 0 will compress the entire waveform, adding samples at volume 0 at the end. In this way, it is analogous to changing pulse width, aka duty cycle. In fact, a common technique to get a smoothly modulated pulse lead (commonly associated with the C64 SID, for example) is to set the Signal to Square, keep Phase type set to Normal, set the start Phase value to 00, and the end Phase to 1F (or 1E in version 4).
 +
 +
 +
<center>[[Файл:Intense Tech with Defence Mech 2 - file 1.gif]]<br/>
 +
''SID lead with Phase Normal''<br/><br/>
 +
{{Audio:http://chipwiki.ru/music/intensetechwithdefencemech/2-1.mp3}}</center>
 +
 +
 +
For an interesting vocal-like lead, try this with Triangle instead of Square.
 +
 +
If we change the Phase type to Resync, we’ve just given ourselves another way to add new overtones similar to changing the Cutoff of the wave. Resync, instead of compressing the waveform once and adding 0-value samples at the end, repeats the waveform until all 32 samples are filled.
 +
 +
 +
<center>[[Файл:Intense Tech with Defence Mech 2 - file 2.gif]]<br/><br/>
 +
{{Audio:http://chipwiki.ru/music/intensetechwithdefencemech/2-2.mp3}}</center>
 +
 +
''(note: in version 4 of LSDj, Phase 1F is usually silent, so this waveform would have to be input manually)''
 +
 +
You can also experiment with Resync2, which like Resync repeats the waveform to fill the wave frame, but does not compress it. This normally has the effect of lowering the volume, as when you only loop a part of the waveform, it typically doesn’t reach as high or low as it normally would. However, the loss of volume complements additional harmonics comprised in the waveform.
 +
 +
 +
<center>[[Файл:Intense Tech with Defence Mech 2 - file 3.gif]]<br/><br/>
 +
{{Audio:http://chipwiki.ru/music/intensetechwithdefencemech/2-3.mp3}}</center>
 +
 +
Up to now, our changes to the waveforms have resulted in a fairly clean sound. Overtones have a smooth, clear sound. But what if we really want to add some grit? We’re gonna have to get down and dirty to make our sine wave turn into something like this:
 +
 +
 +
<center>[[Файл:Intense Tech with Defence Mech 2 - file 4.gif]]<br/><br/>
 +
{{Audio:http://chipwiki.ru/music/intensetechwithdefencemech/2-4.mp3}}</center>
 +
 +
The last frame of the synth above is what pure noise looks like in the wave channel. The noisier the waveform gets, the more the overtones are combined differently to add more grit. Here’s an example of what 16 different frames of pure noise sound like:
 +
 +
 +
<center>[[Файл:Intense Tech with Defence Mech 2 - file 5.gif]]<br/><br/>
 +
{{Audio:http://chipwiki.ru/music/intensetechwithdefencemech/2-5.mp3}}</center>
 +
 +
So how do we add this noise to our waveforms? One way is by essentially adding extra “notches”. This can be done manually, like adding some extra grit to a normal sine wave.
 +
 +
 +
<center>[[Файл:Intense Tech with Defence Mech 2 - file 6.gif]]<br/><br/>
 +
{{Audio:http://chipwiki.ru/music/intensetechwithdefencemech/2-6.mp3}}</center>
 +
 +
Dist (Distortion) type also affects wave noise content. Distortion in LSDj refers to what happens when the waveform exceeds the available dynamic range, that is, what happens when increasing a waveform’s Volume or Q takes it beyond the maximum volume. As you’ll recall, volume is represented by the values 0-F. If the peak volume of the signal goes higher than F or lower than 0, the Dist type of the waveform dictates how LSDj reacts.
 +
 +
The default Dist type, Clip, chooses to just “clip” those values at 0 and F. It’s as if we just shave the top and the bottom right off. The more we increase the volume of our sine wave, the more and more it starts to look and sound like a square wave.
 +
 +
 +
<center>[[Файл:Intense Tech with Defence Mech 2 - file 7.gif]]<br/><br/>
 +
{{Audio:http://chipwiki.ru/music/intensetechwithdefencemech/2-7.mp3}}</center>
 +
 +
Remember that a square wave adds extra odd overtones to the sine wave sound, so this is one possibility.
 +
 +
The next option, Fold (introduced in version 6), “mirrors” what those volumes would be across the top and bottom.
 +
 +
 +
<center>[[Файл:Intense Tech with Defence Mech 2 - file 8.gif]]<br/><br/>
 +
{{Audio:http://chipwiki.ru/music/intensetechwithdefencemech/2-8.mp3}}</center>
 +
 +
Now, instead of chopping off those components of our sine wave that peak over the top and bottom, that “excessive” volume is folded back onto the main waveform. Compared to the deep square-like sound of Clip, this is much higher and more resonant with upper overtones. It’s also quieter than Clip because fewer samples are at the very top and bottom of the dynamic range. However, you could increase the Volume or Q and let the samples fold back and forth multiple times to add more crunch.
 +
 +
The last option, Wrap, will carry any loudness past the top and wrap the next sample upwards from the bottom, and vice versa. Compared to Clip and Fold, it’s characterized by a harshness and buzz in the resulting sound. It tends to be louder than Fold because it distributes more samples evenly throughout the entire dynamic range, although it’s usually not as loud as Clip.
 +
 +
 +
<center>[[Файл:Intense Tech with Defence Mech 2 - file 9.gif]]<br/><br/>
 +
{{Audio:http://chipwiki.ru/music/intensetechwithdefencemech/2-9.mp3}}</center>
 +
 +
When you set Dist to Wrap and increase the volume, many sample values are wrapped repeatedly since they exceed 0-F many times. This creates many instances where samples jump across a large portion of the dynamic range. When you increase Volume or Q, you can cause the waveform to wrap in unpredictable ways, so it may be difficult to dial in a precise sound. You’ll just have to experiment and hear how the various upper overtones will color the sound, but in general it will sound harsh, rich, buzzy, and crunchy.
 +
 +
To recap what we’ve learned so far:
 +
* If your waveform looks like a sine, square, or triangle wave with 1 complete cycle contained entirely within the wave frame, its sound will be clear and smooth. At low octaves it will have plenty of bass.
 +
* The more repetitions of a wave cycle that are within the wave frame, the higher the frequencies will be produced in the resulting notes. The number of repetitions corresponds to the harmonic of the note in the harmonic series that will be produced.
 +
* The more noise that occurs within the wave frame, the less clear it will sound, and the more the sound will be colored by the upper overtones, giving it a buzzier, ringier tone. At low octaves it will have less emphasized bass and a harsher, rougher, crunchier sound.
 +
* Ways of adding higher frequencies include manually adding “notches” into the waveform, setting higher Cutoff values and increasing the Q for emphasis, changing the Phase type and increasing the values, and adding Dist of different types while increasing the Volume or Q.
 +
 +
Alright, so we’ve got a really noisy waveform! Now what? Maybe it’s TOO noisy! What if we like the sound of it, but we want to tame it a bit while still keeping its character mostly intact?
 +
 +
I’m so glad you asked! Another new feature added in version 6 is the ability to Limit the volume AFTER the initial Volume, Cutoff, Q, and Phase are applied. The value applied in Limit restricts the samples to a volume range, for example setting Limit to “F” allows all volumes 0 through F, but setting Limit to “5” only allows volumes 5 through A (10 in hexadecimal), so values that would reach below 5 or above A are kept constrained within that range according to the current Dist type.
 +
 +
This is an incredibly helpful feature, because as we have seen, it’s easy to reach the maximum available dynamic range in the Wave screen even if our Volume values are set very low. Additionally, the Game Boy doesn’t help us much, because it only allows 4 hardware volumes in the Wave channel: 100%, 50%, 25%, and 0% (off). When we are Clipping or Wrapping our waveforms and constantly reaching volume range all the way from 0-F, the wave channel has the unfortunate tendency of often being too loud at 100% volume but too quiet at 25% or 50%. Thankfully, now we can still choose to distort our waveform to get some richness with added overtones, but with a much fuller control of range of volume. To help us even more, we have the ability to choose one volume range at the Start point and another volume range at the End point. This will let us smoothly transition from loud to quiet or vice versa, as shown here with Limit starting at F and ending at 4.
 +
 +
 +
<center>[[Файл:Intense Tech with Defence Mech 2 - file 10.gif]]<br/><br/>
 +
{{Audio:http://chipwiki.ru/music/intensetechwithdefencemech/2-10.mp3}}</center>
 +
 +
To close, we have the Vshift, or Vertical Shift, feature. This parameter lets us shift the samples in the waveform upwards. In previous versions of LSDj, Vshift functioned similarly to Wrap distortion such that as the waveform shifts vertically, after it reaches F it wraps around starting again at 0. This made it possible to choose Clip Dist, increase volume, and still add wrapping with a change of Vshift to introduce some harsher sounds. Like Wrap, increasing Vshift often results in unpredictable changes, but it can be fun to experiment with.
 +
 +
In version 6 of LSDj, Vshift follows the current Dist setting. With Clip, Vshift will squash the waveform towards the ceiling as the value increases. This, like Fold and Resync2, has the effect of making the waveform quieter.
 +
 +
 +
<center>[[Файл:Intense Tech with Defence Mech 2 - file 11.gif]]<br/><br/>
 +
{{Audio:http://chipwiki.ru/music/intensetechwithdefencemech/2-11.mp3}}</center>
 +
 +
Set to Fold, it will again mirror across the top. With Vshift set to FF, the original wave will be inverted.
 +
 +
 +
<center>[[Файл:Intense Tech with Defence Mech 2 - file 12.gif]]<br/><br/>
 +
{{Audio:http://chipwiki.ru/music/intensetechwithdefencemech/2-12.mp3}}</center>
 +
 +
Set to Wrap, it will wrap around from the bottom.
 +
 +
 +
<center>[[Файл:Intense Tech with Defence Mech 2 - file 13.gif]]<br/><br/>
 +
{{Audio:http://chipwiki.ru/music/intensetechwithdefencemech/2-13.mp3}}</center>
 +
 +
Hopefully by now you’ve gotten a much better grip of how the Wave Synth works in LSDj! I hope this has helped you to fearlessly explore all kinds of options and gives you a good idea of what kind of parameters you need to adjust when looking for a particular sound, but also I hope that it helps you experiment to find a new sound that you haven’t heard before! See you next time!
 +
</spoiler>
  
 
==Don’t Sleep on Z==
 
==Don’t Sleep on Z==

Версия 09:41, 18 марта 2019

Это руководство к LSDJ

LSDj Wave Synth Deep Dive Part 1

Оригинальная статья на chiptuneswin.com

Клик

LSDj Wave Synth Deep Dive Part 2

Оригинальная статья на chiptuneswin.com

В процессе перевода


Don’t Sleep on Z

Оригинальная статья на chiptuneswin.com

Manage your LSDj save files with libLSDj!

Оригинальная статья на chiptuneswin.com

Источник — «http://chipwiki.ru/index.php?title=Intense_Tech_with_Defence_Mech&oldid=44801»